DSPIAE XSP Self-Adhesive Sandpaper is a peel-and-stick abrasive sheet series made for model building. It’s designed to pair with sanding plates/blocks so you can get flat, even sanding for nub cleanup, seam removal, surface prep, and finishing—without the paper shifting around.
Peel-and-stick convenience
Each sheet uses a pressure-sensitive adhesive backing: peel, apply, press flat, and you’re ready to sand. When worn, it can be removed and replaced quickly, making it easy to progress through grits during a build.
Key features
Self-adhesive backing for stable, slip-free sanding
Helps keep sanding flat and consistent on broad surfaces
Easy replacement: swap sheets when the abrasive is worn
Suitable for plastic model materials (e.g., PS/ABS) and general hobby use
Works well with sanding plates/blocks (rigid backers) for better control
How to use
Clean the sanding plate/block surface (dust-free for best adhesion).
Peel off the backing and apply the sheet from one end to the other to avoid bubbles.
Press firmly to secure the sheet.
Sand with light pressure, then change to finer grit as needed.
Peel off and replace when the cutting performance drops.
Grit selection tip
Lower grits: faster shaping / removing marks
Mid grits: smoothing and refining
Higher grits: pre-paint finishing or polishing prep
Notes
Adhesion works best on clean, dry backers; replace the sheet if edges lift.
Exact sheet size and grit lineup can vary by pack/version—match it to your sanding plate or preferred format.
