DSPIAE CG Carving Guide Tape is a self-adhesive scribing guide tape made for cutting clean, straight (and gently curved) panel lines on plastic model parts. The tape is hard, thin, and transparent, with a printed 1mm graduation grid to help with accurate positioning and consistent spacing.
Key features
- High-transparency PET material with good stiffness for stable scribing guidance
- Printed 1mm grid for easier alignment and measurement while placing the tape
- Acrylic adhesive designed to stick securely and remove cleanly (no residue under normal use)
- Hard & thin profile helps keep your scriber/chisel running straight along the edge
Sizes
- Available widths: multiple options in the CG series (commonly 2mm–10mm, depending on variant)
- Roll length: 30m per roll
- Tape thickness: approx. 0.12mm
Best uses
- Scribing new panel lines on armour plates and flat surfaces
- Re-scribing or extending existing panel lines
- Marking parallel offsets using the 1mm grid as a visual reference
- Guiding chisels/blades for consistent straight-line engraving
How to use
- Clean the surface (remove dust/oil) before applying the tape.
- Place and press down firmly along the full length to prevent lifting.
- Scribe with light passes first, then deepen gradually.
- Peel off slowly after scribing; for long lines, peel back along the line direction.
What’s included
- 1 × Roll of DSPIAE CG Carving Guide Tape (width depends on variant selected)
Notes
- Because the tape is stiff for precision, it works best for straight lines and gentle curves. For tight curves, use shorter pieces and/or a narrower width.
- On painted/primed surfaces, test first to ensure safe removal.
