DSPIAE MT Masking Tape is a high-quality washi masking tape made for clean paint masking on plastic models. It offers reliable adhesion while helping you achieve sharp paint edges without fuzzy cuts, and it is designed to peel off cleanly after use when applied properly.
Key features
- Washi tape material with strong, stable adhesion for modelling work
- Clean removal designed to minimise glue residue after masking
- Neat cutting: can be cut cleanly without fuzzy edges that can spoil paint lines
- Flexible: conforms well to surfaces and helps reduce cracking/lifting along the edge
- PET side reinforcement helps prevent deformation and reduces dust attraction on the tape edge
- Plastic core helps avoid paper dust from the roll core during storage/use
Available widths
- MT-02: 2mm
- MT-03: 3mm
- MT-05: 5mm
- MT-10: 10mm
- MT-15: 15mm
- MT-20: 20mm
Best uses
- Masking panel edges for two-tone and multi-colour paint schemes
- Creating sharp separation lines on armour plates, shields, and aircraft panels
- Protecting finished areas during touch-ups, weathering, and detail painting
How to use
- Wipe the surface clean (dust/oil reduces adhesion and can cause paint bleed).
- Apply the tape and press the edge down firmly (use a cotton bud or tool for best seal).
- Spray/paint in light coats rather than flooding the edge.
- Peel back slowly at a low angle once the paint is touch-dry for the cleanest line.
Notes
- For delicate surfaces (fresh paint/clear coat), reduce tack first by sticking the tape to clean fabric and lifting once before application.
- For curves, use narrower widths and shorter segments to maintain edge contact.
