DSPIAE CA Glue Series includes two low-fogging cyanoacrylate options for scale modelling: NG-01 Non-fogging Instant CA (thin/fast) and LG-02 Low-fogging Gel CA (thicker/controlled). Both are designed to minimise the white “frosting” often seen with standard super glue—especially helpful around clear parts, photo-etch, and display-facing areas.
Choose your type
- NG-01 Non-fogging Instant CA (Thin): fast-setting, lower-viscosity CA for clean, near-invisible joints and wicking into tight seams.
- LG-02 Low-fogging Gel CA (Gel): thicker gel CA for better placement control and light gap-filling, with reduced running.
Key features
- Low-fogging / low-whitening formula helps reduce haze around the bond line.
- Fast bonding for efficient assembly and detail work.
- Suitable for mixed-media builds such as plastic, resin, and metal details (test first on unfamiliar materials).
- Precision application using dedicated nozzle/applicator systems (varies by type).
Best uses
- NG-01 (Thin): clear parts (canopies/lenses), photo-etch, fine details, tight seams where capillary action is useful.
- LG-02 (Gel): controlled spot-bonding, parts that need a little positioning time, and small gaps where thin CA would run away.
How to use
- Prep: dry-fit first; keep contact surfaces clean and dust-free.
- NG-01: apply a tiny amount, join parts, and hold briefly. Use the nozzle for accurate placement and minimal excess.
- LG-02: apply a small dot/line, position parts, then hold. The gel consistency helps it stay where you put it.
- Allow extra time before sanding or stressing the joint (full cure is slower than initial grab).
What’s included
- NG-01 pack: 1 × NG-01 glue bottle (20 g) + 3 × nozzle applicators
- LG-02 pack: 1 × LG-02 gel glue bottle (20 g) + applicator with stainless-steel nozzle set (includes extra nozzles)
Notes & safety
- Even “non-fogging” CA performs best with good ventilation and minimal application, especially near clear parts.
- CA bonds skin quickly—use care and keep away from children.
- Cap tightly after use and store cool/dry to reduce clogging and extend working life.
