DSPIAE MEP Epoxy Modelling Putty is a two-part epoxy putty made for model making—ideal for sculpting details, seam/gap filling, and small modifications. Before curing it stays paste-like for easy shaping, and once cured it has very low shrinkage and can be sanded, drilled, and painted.
Key features
- Easy sculpting for detailing and seam/gap filling
- Simple mixing: two-part epoxy putty system
- Strong bonding with good adhesion after curing
- Low shrinkage for cleaner finishing
- Versatile finishing: drillable, sandable, and paintable after cure
- Simple to work with: no special tools required; workable by hand
Colour options
- MEP-01 – Skin (peach)
- MEP-02 – White
- MEP-03 – Grey
Best uses
- Filling seam lines and small gaps on armour plates and weapons
- Rebuilding corners/edges after trimming or cutting
- Sculpting small shapes: rivets, hoses, cloth folds, organic details
- Strengthening or rebuilding small broken areas before re-scribing
How to use
- Cut out the amount you need from Part A and Part B, then knead until the putty becomes an even, uniform colour.
- Work time: approximately 90 minutes for shaping and sculpting.
- Let it cure, then sand/shape as needed. Sanding can be started after about 6 hours of curing.
What’s included
- 1 × DSPIAE MEP Modeling Epoxy Putty set (Part A + Part B, 50g + 50g)
Notes & storage
- Store in a cool, dry place and keep tightly sealed after opening.
- Avoid letting Part A and Part B touch until you are ready to mix.
- Best working temperature is around 20–25°C; curing may slow down below 10°C.
- For easier handling, you can lightly moisten fingertips (e.g., water) to reduce sticking.
